Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page85
Example 1: NXXXXXX will match any 7 digits phone number.
Example 2: 1NXXNXXXXXwill match a phone number starting with a 1,
followed by a 3-digit area code, and then 6 digit number.
·Distinctive Ringtone
MyPBX support mapping to custom ring tone files. For example, if you configure
the distinctive ringing for custom ring tone to „Family‟, the ring tone will be
played if the phone receives the incoming call. This feature works with all IP
phones which support distinctive ringtone.
How do I configure distinctive ring tones? Please refer to APPENDIXE.
Note: If you want to use feature Distinctive ringtone, please confirm you‟re
your IP phone support this feature firstly. Currently distinctive ringtone can be
compatible with Yealink and Snom phone.
·Enable Callback
You can enable the callback function of this inbound route. If you want to
configure the callback function, please refer to chapter 6.7.4
2） Member Trunks
This area allows you to select which trunks will be member trunks for this route.
To make a trunk a member of this route, please move it to the 'Selected' box.
3） Business Days
Define where the calls will be routed during Business Days.
·Office Hours
Select one defined business days office hours.
·Office Hours Destination
Configure where to route the incoming calls during office hours.
·End Calls
Route the incoming calls to end calls, System will auto hang-up the call.
·Extension
Route the incoming calls to a specific extension.
·Voicemail
Route the incoming calls to extension‟s voicemail.
·IVR
Route the incoming calls to a specific IVR.