Installation guide

MyPBX U200 Installation Guide
http://www.yeastar.com 8/13
2. Connection of GSM/UMTS ports
If No.3 and No.7 connectors are GSM/UMTS Ports, the steps of connection are as below:
Step 1: Open the Upper case of MyPBX U200
Step 2: Insert the SIM card:
Figure 3-2 Inserting the SIM Card
Step 3: Connect the antenna
Once completed, the No.3 and No.7 LED lights would turn red as below figure:
Figure 3-3 Connection of GSM/UMTS ports
3. Connection of BRI ports
The BRI port could be connected to the BRI line and the BRI port of a traditional PBX with a BRI RJ45-RJ11
cable.
For instance, if No.14 and No.16 connectors are BRI ports, the connection could be depicted as below: