User manual

MyPBX-SOHO User Manual

telephones to your PBX, and FXO interfaces allow you to connect your PBX to

real analog phone lines.

5.1.1 Make call via PSTN trunk

For our demo, we want all inside extensions dial ‘9’ through the Analog

Trunk callout. In Outbound Routes  add a new Outbound Route as below.

Figure 5-1

As we can see from the Outbound Route of ‘pstnout’, all numbers start with

9 will be cut the first digit (‘9’) and send to PSTN (port 1-2).

After we have done above, in the extension we can dial 9 + local number to

dial out via PSTN line.

Note: Set number prefix to wild card X and set Strip 0 digits from

front will match all the outbound call to go through this outbound

route.