User manual

MyPBX-SOHO User Manual

3.5.5 Paging and Intercom

Paging and Intercom is for specific phones that are capable of Paging or

Intercom. It can be used to make an announcement over the speakerphone on

a phone or a group of phones. Targeted phones will not ring, but answer

immediately into speaker-phone mode. This section is for configuring group

paging, intercom is configured through Feature Codes.

This feature should work with Yealink's T28,T26,T22,T20,T10T,T9CM and

possibly other manufacturer's SIP phones(not ATAs). Any phone that is always

set to auto-answer should also work.

Figure 3-27

Click ‘New Paging Group’ to enter into page.

·Number for this Paging group

This option defines the numbered extension that may be dialed to reach this

paging Group.

·Duplex

Paging is typically one way for announcements only. Checking this will make the

paging duplex, allowing all phones in the paging group to be able to talk and be

heard by all. This makes it like an “instant conference”.