Specifications
MyPBX Standard Administrator Guide
190/219
APPENDIX J How to Use TLS in MyPBX
J.1 How to register IP phones to MyPBX via TLS
MyPBX is working as a SIP server, IP phones register to MyPBX as extensions via
TLS.
1. Enable TLS in MyPBX’s web interface
Click “PBXSIP settingsGeneral” to get the settings about TLS, which is
disabled by default. If you are using MyPBX standard, please find it in “Internal
SettingsSIP Settings” page.
Figure J-1
·TLS Port
Port use for Sip registrations, Default is 5061.
·TLS Verify Server
When using MyPBX as a TLS client, whether or not to verify server’s certificate.
It is “No” by default.
·TLS Verify Client
When using MyPBX as a TLS server, whether or not to verify client’s certificate.
It is “No” by default.
·TLS Ignore Common Name
Set this parameter as “No”, then common name must be the same with IP or
domain name.
·TLS Client Method