Specifications

MyPBX Standard Administrator Guide
146/219
Figure 0-1
2. Service:
This page shows the general service like AMI, SSH and TFTP, we recommend
disabling them if not used.
Note: TFTP is used for phone provisioning, it’s enabled by default, you can
disable it after all phones are well configured.
Figure 0-2
3. Firewall:
In this page, the basic information of firewall rules are displayed. We
recommend configuring it step by step following part 2 of this manual.
Figure 0-3
1. Ports and password
enhancement
Ports and password are most important for security; we recommend changing
the default ones to your own.