User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 70
Figure B-2 Autobackup Setting
SMB share host/IP: Change this to the IP address of the computer where
backup files will be stored.
SMB share name: Change this to the name of the shared folder where
backups will be stored.
SMB share username: The user name used to log into the network share.
Leave this blank if it is not required
SMB share password: The password used to log into the network share.
Leave this blank if it is not required
If configuring Autobackup for the first time, the system will prompt you to
restart MyPBX once your settings have been saved. After rebooting, open
your Windows share folder to see if the MyPBX backup files and folders has
been created. If the contents of the backup folder look similar to Figure B-3,
then you have successfully configured Autobackup on the MyPBX unit.
Figure B-3 Autobackup setting succeed