User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 7
2. System set up
2.1 Connection Drawing
2.2 Connecting Ethernet Line
MyPBX provides two 10/100M Ethernet ports with RJ45 interface and LED
indicator. Plug Ethernet line into MyPBX’s Ethernet port, and then connect
the other end of the Ethernet line with a hub, switch, router, LAN or WAN.
Once connected, check the status of the LED indicator. A yellow LED
indicates the port is in the connection process, and a green LED indicates the
port is properly connected.
2.3 Connecting Power
MyPBX utilizes the high-performance switch power, which supply the
enough voltage and electrical energy that required by MyPBX system.
AC Input: 100~240V
DC Output: 12V,1A
PSTN
PSTN
Normal Phone
IP Phone
601
602
FXS Ports LAN
FXO Ports
IP Provider
Soft Phone
Router