User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 30
Define the Caller ID Number to be matched on incoming calls. Leave this field
blank to match any or no DID info.
You can also use a pattern match (e.g. 2[345]X) to match a range of numbers.
·Pattern
Define the Caller ID Number to be matched on incoming calls. Leave this field
blank to match any or no CID info.
In patterns, some characters have special meanings:
X ... Any Digit from 0-9
Z ... Any Digit from 1-9
N ... Any Digit from 2-9
[12345-9]... Any Digit in the brackets (in this example, 1,2,3,4,5,6,7,8,9)
. ... Wildcard: Matches anything remaining; i.e. 9011. Matches anything starting
with 9011 (excluding 9011 itself)
! ... Wildcard: Causes the matching process to complete as soon as it can
unambiguously determine that no other matches are possible.
For example, NXXXXXX would match 7 digits while 1NXXNXXXXX would
represent a three digit area code plus phone number proceeded by a one.
2）Trunk Sequence
This selection shows all Trunks. Moving a trunk to the ‘Selected’ box makes it a
member of the inbound route.
3）During Office Hours
You can choose how to route incoming calls during office hours.
4）Outside Office Hours
You can choose how to route incoming calls outside of business hours.