User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 29
Figure 3-20
3.4.4.1 Create Inbound Route
Click ‘New Inbound Route’ to enter to the Manage Inbound Routes page.
1）General
·Route Name
Name of this inbound Route. Ex: 'pstncallin' etc.
·DID Number
Define the expected DID Number if your trunk passes DID on incoming calls.
Leave this field blank to match calls with any or no DID info. Only Service or E1
trunks need to be configured.
You can also use a pattern match (e.g. 2[345]X) to match a range of numbers.
·Pattern
In patterns, some characters have special meanings:
X ... Any Digit from 0-9
Z ... Any Digit from 1-9
N ... Any Digit from 2-9
[12345-9]... Any Digit in the brackets (in this example, 1,2,3,4,5,6,7,8,9)
. ... Wildcard: Matches anything remaining; i.e. 9011. Matches anything starting
with 9011 (excluding 9011 itself)
! ... Wildcard: Causes the matching process to complete as soon as it can
unambiguously determine that no other matches are possible.
For example, NXXXXXX would match 7 digits while 1NXXNXXXXX would
represent a three digit area code plus phone number proceeded by a one.
·Caller ID Number