User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 21
3.3.3.1 Create Outbound Route
Click ‘New Outbound Route’ and fill in the corresponding information in the
popup window.
1）General
·Route Name
Name of this Outbound Route. Ex: 'Local' or 'LongDistance' etc.
·Dial Pattern
In dial patterns, some characters have special meanings:
X ... Any Digit from 0-9
Z ... Any Digit from 1-9
N ... Any Digit from 2-9
[12345-9] ... Any Digit in the brackets (in this example, 1,2,3,4,5,6,7,8,9)
. ... Wildcard, Matches Anything Remaining; i.e. 9011. Matches anything
starting with 9011 (excluding 9011 itself)
! ... Wildcard, causes the matching process to complete as soon as it can
unambiguously determine that no other matches are possible.
For example, NXXXXXX would match normal 7 digit dialings, while
1NXXNXXXXX would represent a three digit area code plus phone number,
proceeded by a one.
·Strip
Allows the user to specify the number of digits that will be stripped from the
front of the dialing string before the call is placed via one of the selected trunks
For example, to dial 9 before a long distance call, one digit should be stripped
from the front before the call is placed.
·Prepend digits before dialing
Allow the user to specify digits that are prepended to a number before the call is
placed over a trunk. If a trunk requires 10 digit dialing, but users prefer 7 digit
dialing, this field could be used to prepend a 3 digit area code to all 7 digit
strings before they are routed to a trunk. User may also prepend a 'w' character
for analog trunks to provide a LED delay before dialing
·Calls From Extensions
Define the Extensions that are allowed to use the selected trunks.
·Make Outbound Calls on Trunk
Define the Trunks that calls, matching the specified pattern, will be placed
through.