User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 14
2) Voice Mail
·Voice Mail Access PIN Code
Voicemail Password for this user, Ex: ‘1234’.
·Send Voice Mail to Email Address
This option defines whether or not voicemails are sent to an Email Address as
attachment.
Note: You need to have an SMTP server configured for this functionality.
3) VoIP Setting
·NAT
Try this setting when MyPBX is on a public IP and communicating with devices
hidden behind a NAT device (broadband router). If you have one-way audio
problems, you usually have problems with your NAT configuration or your
firewall's support of SIP or RTP ports.
·DTMF Mode – RFC2833, Info, Inband, Auto.
4) IP Restriction
·Enable IP Restriction
Check this option to enhance the VoIP security for MyPBX. If this option is
enabled, only the permitted IP or network will be able to access MyPBX’s VoIP
Server.
·Permitted IP/Network
The certain IP or network permitted to access MyPBX’s VoIP Server.
The input format should be : IP address/network mask
Ex: 192.168.5.100/255.255.255.255 – Will allow traffic from IP 192.168.5.100
Ex: 120.42.46.120/255.255.255.255 – Will allow from IP 20.42.46.120
Ex: 192.168.5.0/255.255.255.0 – Will allow from network 192.168.5.0
5) Group
·Pickup Group
If a phone is assigned to a pickup group that is shared with a ringing phone, that
phone may pick up the incoming call by pressing *4. *4 is the default setting,
but it can be changed under Feature Codes -> General -> Call Pickup.
6) Follow me (Call Forwarding)
This function sets inbound call forwarding on an extension. An administrator can
configure Follow Me for this extension.
7）Other Options
.Call Waiting
Check this option if the User or Phone should have Call-Waiting capability. If this
option is checked, busy transfer will not be available.
.Hasmanager/Web Access