Specifications

MyPBX SOHO Administrator Guide
94/204
Note: This function only supports T.38 faxes.
·Outbound Routes
Route the incoming calls to a specific outbound route.
This function is mainly used for the connection of two branches.
For example: Company A locates headquarters in the USA with a branch B in China. A
and B both have a MyPBX phone system.
Now if staff of A would like to make a call to a telephone or mobile phone in China from the
extension of A but via the FXS line of B, that can be done by this configuration.
·Non-office Hours Destination
Configure where to route the incoming calls during non-office hours.
4) During Holidays
Define where the calls will be routed during Holidays.
·Holiday
Select which defined Holiday to use. When a time is defined in both Business Days and
Holidays, it will be treated as Holidays.
·Destination
Configure where to route the incoming calls during holidays.
5) Fax Detection
Configure if detecting faxes in this inbound route.
Note: Please choose IVR as the destination above before configuring fax detection
(recommended).
·Destination
Configure where the faxes will be routed when faxes are detected.
·No detect
Do not detect faxes.
·Custom Email
Customize an E-mail address to receive the faxes. You should first configure
the “Voicemail Settings->SMTP Settings for Voicemail” correctly before you use this
option.
·Faxes
Send faxes to an extension. If choosing a FXS extension here, the fax will be sent to the
FXS port selected, you should connect a fax machine to this FXS port. If Choosing a VoIP
extension, the fax will be sent to the extension’s voicemail as an attachment.