Specifications

MyPBX SOHO Administrator Guide
9/204
1. Connect the small end of the power cable to the power input port on the MyPBX back
panel, and plug the other end of the cable into a 100VAC power outlet.
2. Check the Power LED on the front panel. A solid green LED indicates that power is
being supplied correctly.
3. Administrator Login
From your web browser, input the IP address of the MyPBX server.
If this is the first time you are configuring MyPBX, please use the default settings as below
(your PC should be in the same local network with MyPBX):
IP Address: http://192.168.5.150