Specifications

MyPBX SOHO Administrator Guide
44/204
This function sets inbound call forwarding on an extension. An administrator can configure
Follow Me for this extension.
9) Volume Settings
Rxgain: The Volume sent to FXS extension.
Txgain: The Volume sent out by the FXS extension
10) Mobility Extension
MyPBX allows you to use your mobile phone as an extension. If you set your mobile
phone as a mobility extension and then you call MyPBX with this mobile phone, you will
hear a dial tone. MyPBX will recognize your call as a call from an extension. You can dial
the number of other extensions (your caller ID will be the number of your extension) or dial
out via outbound routes just like dialing from your extension.
Note: If callback is enabled in the inbound route, the mobility extension function of this
inbound route will be disabled.
Enable Mobility Extension
Enable this feature.
·Mobility Extension Number
When you dial the server with this number, the mobile phone gets the permission of the
extension. For example: dialing the other extensions, playing the voicemail.
·Ring Simultaneously
When the extension has an incoming call, it rings its mobility extension simultaneously.
·Outbound Prefix
Fill in proper prefix of mobile number so that it can match an outbound route to dial the
mobility extension. For example, if you set the prefix 9, it will send “9+ mobility extension
number” to the outbound route.
11) Call ID type
·Call ID Setting
Normally, you choose the “default” option except for using MyPBX in Japan, in which case
you should choose “Japan”.
12) Spy Settings
MyPBX allows extension to monitor/barge in other conversation. Once this feature is
enabled, the extension has the ability to monitor/barge in other calls using the feature
codes for each spy mode. Refer to “Feature Codes” section for more information.
·spy modes
There are 4 spy modes available: