Specifications

MyPBX SOHO Administrator Guide
37/204
5.5.2 Date and Time
Set the date and time for MyPBX.
Figure 5-29
·Time Zone
You can choose your time zone here.
·Daylight Saving Time
Set the mode to Automatic or disabled
·Automatically Synchronize With an Internet Time Server
Input the NTP server so that MyPBX will update the time automatically
·Set Date & Time Manually
You can set the time to your local right time manually here
5.5.3 Firmware Update
Upgrading of the firmware is possible through the Administrator web interface using a
TFTP Server or an HTTP URL.
Enter your TFTP Server IP address and firmware file name, then click start to update the
firmware
Notes:
1. If “Reset configuration to Factory Defaults” is enabled, the system will restore to factory
default settings.
2. When updating the firmware, please don’t turn off the power. Or the system will get
damaged.
3. For more information on the steps of updating the firmware, please refer to this link:
http://www.yeastar.com/download/MyPBX-SOHO/MyPBX_SOHO_FirmwareUpgrade_en.
pdf