Specifications

MyPBX SOHO Administrator Guide
35/204
5.5 System Preferences
In this page, we can set other system preferences, like the password for admin account,
system date and time, firmware update, hot standby, backup and restore, reset and
reboot.
5.5.1 Password Settings
MyPBX has 3 accounts: admin, user, and cdr. User and cdr account is disabled by default.
Admin account:
The default password for account “admin” is “password”. To change the password,
select “admin” in “User”, enter the old password and new password, and click “Save”. The
system will then prompt you to re-login using your new password.
After you enter the new password, MyPBX will prompt the password strength. It is
recommended that you use numbers, upper-case letters, and lower-case letters to
increase the security.
When you log in MyPBX using “admin” account, you can enable “user” and “cdr” account;
also, you can change their passwords.
Figure 5-26
User account:
User account is disabled by default and its default password is “password”. When
enabling “user” account for the first time, MyPBX will ask you to change “user” password.
If you don’t change it, you can’t enable “user” account.
To change the password, select “user” in “User”, enter the old password and new
password, and click “Save”. The system will then prompt you to re-login using your new
password.
After you enter the new password, MyPBX will prompt the password strength. It is
recommended that you use numbers, upper-case letters, and lower-case letters to
increase the security.