Specifications

MyPBX SOHO Administrator Guide
201/204
APPENDIX J How to use LDAP
LDAP stands for Lightweight Directory Access Protocol, which is a client-server protocol
for accessing a directory service. Normally, it is used as a phone book on MyPBX so that
you can search a key word from your IP phone.
Here we take Yealink T-28 IP phone as an example.
1. Configuration on MyPBX.
Tick the option of “Enable LDAP”, and use default configuration in the other fields.
Default configuration as below:
Root Node: dc=pbx,dc=com
PBX Node: ou=pbx,dc=pbx,dc=com
User Name: cn=admin,dc=pbx,dc=com
Password: (fill in as required)
Then you can add contact as required.
Figure K-1
2. Configuration on Yealink T-28 IP phone