Specifications

MyPBX SOHO Administrator Guide
176/204
·TLS Client Method
When using MyPBX as a TLS client, specify the protocol for outbound TLS connections.
You can select it as tlsv1, sslv2 or sslv3.
Figure I-2
Notes:
1. For security reason, we recommend enabling “TLS Verify Client” and disabling “TLS
Ignore Common Name”, in which case, MyPBX will verify IP phone’s Certificate, the
common name inside CA should be the same as its IP or domain name.
2. TLS Client Method: it’s the TLS method of IP phone; you can contact the
manufacturer of the IP phone to get that.
3. You need to reboot MyPBX to take effect after enabling TLS.
2. Prepare the whole certificates for TLS
Here are the certificates of MyPBX and IP phones for TLS registry as the screen shot
above:
MyPBX’s CA: CA.crt.
MyPBX’s server certificate: asterisk.pem.
IP phone’s CA: CA.crt or CA.csr.
IP phone’s server certificate: client.pem.
The certificate is generated via the toolkit OpenSSL, you can compile the source package
from http://www.openssl.org/
, or download the tool used here, download link:
www.yeastar.com/download/tools/TLS_CA_Tool.rar
You can find the files inside the package like these: