Specifications

MyPBX SOHO Administrator Guide
175/204
In this case, all international call requests will be routed to this invalid trunk. Ie. The call is
dropped directly.
APPENDIX I How to Use TLS in MyPBX
I.1 How to register IP phones to MyPBX via TLS
MyPBX is working as a SIP server, IP phones register to MyPBX as extensions via TLS.
1. Enable TLS in MyPBX’s web interface
Click “PBXSIP settingsGeneral” to get the settings about TLS, which is disabled by
default. If you are using MyPBX SOHO, please find it in “Internal SettingsSIP Settings”
page.
Figure I-1
·TLS Port
Port use for Sip registrations, Default is 5061.
·TLS Verify Server
When using MyPBX as a TLS client, whether or not to verify server’s certificate. It is “No”
by default.
·TLS Verify Client
When using MyPBX as a TLS server, whether or not to verify client’s certificate. It is “No”
by default.
·TLS Ignore Common Name
Set this parameter as “No”, then common name must be the same with IP or domain
name.