Specifications

MyPBX SOHO Administrator Guide
17/204
Set the primary DNS for MyPBX.
·Secondary DNS
Set the secondary DNS for MyPBX.
·IP Address2
Set the second IP Address for MyPBX.
·Subnet Mask2
Set the second subnet mask for MyPBX.
5.1.2 DHCP Server
Dynamic Host Configuration Protocol (DHCP) is a network protocol that enables a server
to automatically assign an IP address to a computer from a defined range of numbers (i.e.,
a scope) configured for a given network. You can set a local network NTP server for
MyPBX here, too.
Note: MyPBX SOHO can be working as a DHCP server, but cannot be regarded as a
router.
Figure 5-2
5.1.3 VLAN Settings
A VLAN (Virtual LAN) is a logical local area network (or LAN) that extends beyond a single
traditional LAN to a group of LAN segments, given specific configurations.
Note:
MyPBX SOHO is not the VLAN server, a 3-layer switch is still needed, please configure
the VLAN information there first, then input the details in MyPBX, so that the packages via
MyPBX will be added the VLAN label before sending to that switch.