Specifications

MyPBX SOHO Administrator Guide
165/204
3. Use command passwd to change the root’s password
Figure H-3-5
You need to input the new password twice to take effect.
3.3 AMI settings*
The Asterisk Manager Interface (AMI) allows a client program to connect to an Asterisk
instance and issue commands or read events over a TCP/IP stream. Integrators will find
this particularly useful when trying to track the state of a telephony client inside Asterisk,
and directing that client based on custom (and possibly dynamic) rules.
For more information, you can refer to this page:
http://www.voip-info.org/wiki/view/Asterisk+manager+API
Note: this feature is disabled by default; there is no need to enable it for general use. If it’s
enabled, please change account and configure IP restriction.