Specifications

MyPBX SOHO Administrator Guide
161/204
Figure H-2-10
Step 7. Enable “Drop all” (If this feature is enabled, all the packets
and connection that do not match the rules would be dropped.)
Warning: Before enabling this feature, please create a rule to accept the local network
access, or the server might not be accessed.
Figure H-2-11
Notes:
1. After enabling “Drop All”, the rules of auto defense and IP blacklist will not take effect. It
means except the IPs and packets which are defined in the accept rules, the other
connection or packets will be dropped.
2. If “Drop All” is not enabled, please don’t remove the IP blacklist rules in case the system
security hole exists.
Step 8. The configuration of firewall settings is completed. See the
figure below.