Specifications

MyPBX SOHO Administrator Guide
16/204
5.1 Network Preferences
5.1.1 LAN Settings
Figure 5-1
·DHCP
If this option is set, MyPBX will use DHCP to get an available IP address from your local
network. Not recommended as without the right IP address you cannot access MyPBX.
·Enable SSH
This is the advanced way to access the device; you can use the software “putty” to access
the device. In the SSH access, you can do more advanced setting and debug, it’s disabled
by default.
·Port: the default is 8022; you can change it.
·Hostname
Set the host name for MyPBX.
·IP Address
Set the IP Address for MyPBX.
A static IP address for MyPBX is recommended.
·Subnet Mask
Set the subnet mask for MyPBX.
·Gateway
Set the gateway for MyPBX.
·Primary DNS