Specifications

MyPBX SOHO Administrator Guide
152/204
Figure H-1-4
Note: A strong password is a MUST for remote extensions.
1.2.3. IP restriction for extensions
You can find this setting in
PBXExtensionsFXS/VoIP Extensions VoIP ExtensionsGeneralPassword
When it’s configured, only the permitted IP can register this extension. All the other
registry requests will be denied.
The format is “IP address/Subnet mask”, e.g. 192.168.5.136/255.255.255.255. In this way,
only 192.168.5.136 can register this extension 6010.
Figure H-1-5
Note: If it’s for remote extension, a static public IP address is needed to input instead.
1.2.3 Security Configuration for Remote Extensions
PBXExtensionsFXS/VoIP Extensions VoIP ExtensionsGeneral
Enable “NAT” and “Register remotely” like the picture shown below.