Specifications

MyPBX SOHO Administrator Guide
149/204
Figure H-0-1
2. Service:
This page shows the general service like AMI, SSH and TFTP, we recommend disabling
them if not used.
Note: TFTP is used for phone provisioning, it’s enabled by default, you can disable it after
all phones are well configured.
Figure H-0-2
3. Firewall:
In this page, the basic information of firewall rules are displayed. We recommend
configuring it step by step following part 2 of this manual.
Figure H-0-3
1. Ports and password enhancement
Ports and password are most important for security; we recommend changing the default
ones to your own.
1.1 Web GUI (HTTP)
1.1.1 Change the default HTTP bind port.
PBXBasic Settings General PreferencesHTTP Bind Port