Specifications
MyPBX SOHO Administrator Guide
148/204
APPENDIX H MyPBX Security Configuration
Guide
VoIP attack, although not an everyday occurrence does exist. When using VoIP, system
security is undoubtedly one of the issues we care about most. But with the appropriate
configuration, and some basic safety habits, we can improve the security of the telephone
system. Moreover, the powerful built-in firewall function in MyPBX is adequate to enable
the system to run safely and stably.
This guide will introduce the highest defense level in MyPBX, and we strongly recommend
that you configure firewall and other security options according to this guide, to prevent
the attack fraud and the system failure or calls loss.
Notes:
1. In this guide, the configuration options marked with “*” only exist in X.18.XX.XX and
above versions.
2. We recommend upgrading the firmware to the latest edition for security purpose.
3. Don’t map any port to MyPBX in router if not needed.
4. We recommend limiting the credit of VoIP trunks for international calls.
Security Center*
Security center is a new feature since x.18.0.xx, we can get an overview of basic settings
like firewall, service securty and port guard.
Click “System System PreferencesSecurity Center” to get the details. You can click
the button to configure those one by one. You can follow the steps in this manual to
configure and get the resut in this page.
1. Port:
This page shows the SIP port and HTTP port, we can click “Setting” to change that.
It’s recommend that the default port should be changed.