Specifications

MyPBX SOHO Administrator Guide
131/204
9.2 Incoming call
Sample Routing to an IVR
Let’s configure an incoming call to route to the IVR. In the IVR itself, let’s configure digit 0
to route the call to extension 300, and digit 1 to route the call to ringgroup.
1. Add IVR
To add a new IVR, go to IVR Create New IVR.
Figure 9-4
2. Add Inbound Routes
As we can see from the Inbound Route of “VOIP_IN”, all incoming calls from VoIP trunk
will be sent to the IVR.