Specifications

MyPBX SOHO Administrator Guide
129/204
Sample Routing via VoIP Trunk
Let’s configure all inside extensions to dial “0” through the VoIP Trunk.
1. Add VoIP service provider
Before we do add this, please make sure you have a VoIP Trunk account.
Trunks VoIP Trunk  SIP Trunk
Enter your account information on this page, and click Save.
Figure 9-2
2. Add Outbound Routes
As we can see from the Outbound Route of “VOIP_OUT”, all phone numbers starting with
0 will have their first digit stripped off (digit 0) and will be sent to the SIP Trunk.