Specifications

MyPBX SOHO Administrator Guide
124/204
PIN list is a numeric field. Letters and punctuation are not allowed in this field.
Fill in one PIN and if you end with enter for each PIN, you could create multiple PINs.
6.7.9 Paging Groups
Paging is used to make an announcement over the speakerphone to a phone or group of
phones. Targeted phones will not ring, but instead answer immediately into speakerphone
mode. Please note that this section is for configuring paging groups. If you would like to
configure Intercom settings, please open the Other Settings -> Feature Codes screen.
This feature is supported by the following SIP phones:
Yealink's T28, T26, T22, T20, T10T, T9CM. Other SIP devices may also work with this
feature but are not officially supported.
Note: A paging group can have a maximum of 20 members.
Figure 6-77
In this mode, if you dial its number, MyPBX will help to pick up those chosen members and
you can talk directly without any rings.
Figure 6-78
·Paging Group Number
Define the numbered extension that may be dialed to reach this group.