Specifications

MyPBX SOHO Administrator Guide
118/204
Note: Add a phone number in blacklist, such as “05921234567”:
1) If the type is “inbound”, then this number can’t be called.
2) If the type is “outbound”, then the extensions in MyPBX can’t call this number.
6.7.4 Callback Settings
MyPBX allows caller A to dial an inbound route number, and after hearing the ring, A can
hang up the call or wait for MyPBX to cut off the call, then MyPBX will call A with this
number. When A picks up the call, A can dial the number he wants to call; MyPBX will call
the number with its outbound route.
Notes:
1. If you’d like to use callback feature, please make sure it’s enabled on the inbound route
setting panel.
2. No callback rules needed to be set if the trunk supports call back with the caller ID
directly.
Figure 6-68
·Allow All Numbers
If you want to apply Callback function to all incoming numbers, please tick “Allow All
numbers”.
Follow the steps below to use this function.
Step 1: Enable Callback.
Inbound Routes—Choose “Yes” on” Enable Callback” to enable this function.