Specifications

MyPBX SOHO Administrator Guide
110/204
·TCP Port
Port used for SIP registrations. The default is 5060.
·TLS Port
Port used for SIP registrations. The default is 5061.
·TLS Verify Server
When using MyPBX as a TLS client, whether or not to verify server’s certificate. It is “No”
by default.
·TLS Verify Client
When using MyPBX as a TLS server, whether or not to verify client’s certificate. It is “No”
by default.
·TLS Ignore Common Name
Set this parameter as “No”, then common name must be the same with IP or domain
name.
·TLS Client Method
When using MyPBX as TLS client, specify the protocol for outbound TLS connections.
You can select it as tlsv1, sslv2 or sslv3.
·RTP Port Start
Beginning of RTP port range.
·RTP Port End
End of RTP port range.
·DTMF Mode
Set default mode for sending DTMF. Default setting: rfc2833.
·Max Registration/Subscription Time
Maximum duration (in seconds) of a SIP registration. The default is 3600 seconds.
·Min Registration/Subscription Time
Minimum duration (in seconds) of a SIP registration. The default is 60 seconds.
·Default Incoming/Outgoing Registration Time
Default Incoming/Outgoing Registration Time: Default duration (in seconds) of
incoming/outgoing registration.
·Register Attempts
The number of SIP REGISTER messages to send to a SIP Registrar before giving up.