User manual

6xx Series IPPhone
www.escene.cn/en/
Escene Communication Co.,Ltd
SIP Account Settings
SayHi 620 series IP phone make calls based on sip accounts, SayHi 620 series IP phones can
support 8 independent SIP account, each account can be configured to different SIP server.
If you want to… Then...
Create an sip account
--1) Choose “System settings” > “Advanced settings”；
--2) Enter the password required（The default is empty) ；
--3) Choose “SIP” > “Accounts SIP”；
--4) Choose one of the account you want to setting, you can configure
the following parameters
-Enable account: choose Enable
-Account Mode: VOIP
-Display Name: The name displayed on the screen
-User Name: the account matched with the SIP server.
（extension number），
-Authen user: the Authenticated users matched with the SIP
server.（The default With the same account）
-user pwd: the user password matched with the SIP server
-Description: description of this account，
-SIP1: the primary SIP server，By default all calls through the
server，
-SIP2: the secondary SIP ， When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value
is 20 The default value is 3600.
-Con type: the protocol use to communicate with SIP server.
-Amount of used lines: the lines the extension used,can use
1-8,default is 2.
--5 ） Set up the above parameters ， Press Save softkey to saves
settings，Complete the account creation；
* Note: the parameters with the * mark must be setted.