Specifications

MyPBX U5XX Administrator's Guide
www.yeastar.com Page 50
·spy modes
There are 4 spy modes available for choice:
General spy: you have the permission to use the following 3 modes.
Normal spy: you can only hear the call, but can't talk
Whisper spy: you can hear the call, and can talk with the monitored extension
Barge spy: you can hear the call and talk with them both
Note: for example, if 500 want to monitor extension 501, we need to enable the
'allow being spied ' for 501, and choose the spy mode for extension 500.
Then pick up 500 and dial “feature codes + 501” to start monitoring when 501
is in a call
If 500 choose „normal spy‟, it should dial‟*90501‟ to start monitoring;
If 500 choose „whisper spy‟, it should dial „*91501‟ to start monitoring;
If 500 choose „barge spy‟, it should dial „*92501‟ to start monitor;
If 500 choose „general spy‟, it can dial „*90501‟,‟*91501‟ or „*92501‟ to start
monitor.
6.1.2 Phone Provisioning
The Auto Provision sub menu provides users a method to Auto Provision IP
Phone after the Express Setup process.
Note: Auto Provision functions fully test with these models:
Yealink (T12,T18,T20,T22,T26,T28,T32,T38,VP530,VP-2009)
Snom ( 300,320,360,370)
Polycom (IP 6000,IP 7000,IP 32X,IP33X,IP430,IP450,IP550,IP560,VVX1500)
Cisco (IP7940,IP7960)
Aastra(480i,480i CT,6757i,6757i CT, 6737i)
Grandstream(GXP1450,GXP2100,GXP2110,GXP2120)
Escene(ES220,ES320,ES330,ES410,ES620)
Fanvil(C56,C58,C60,C62)
News:
When provisioning Yealink and Snom IP phone, MyPBX is not needed to
be set as the only DHCP server any more