Specifications

MyPBX U5XX Administrator's Guide

www.yeastar.com Page 44

voicemail PIN # as the login and password respectively.

·Ring Out

Check this option if you want to custom the ring time. Tone will stop over the

time defined

8) Follow me (Call Forwarding)

This function sets inbound call forwarding on an extension. An administrator can

configure Follow Me for this extension

9) Volume Settings

Rxgain: The Volume sent to FXS extension.

Txgain: The Volume sent out by the FXS extension

10) Mobility Extension

MyPBX allows you to use your mobile phone as extension. If you set your mobile

phone as mobility extension and then you call MyPBX with this mobility phone,

you will hear a dial tone. MyPBX will recognize your call as a call from an

extension. You can dial the number of other extensions (Your caller ID will be

the number of your extension) or dial out via outbound routes just like dialing

from your extension.

Note: If callback is enabled in the inbound route, the mobility extension

function of this inbound route will be disabled

11) Spy Settings

MyPBX allows extension to monitor/barge in other conversation. Once this

feature is enabled, the extension has the ability to monitor/barge in other calls

using the feature codes for each spy mode, refer to 'Feature Codes' page for

more information.

·spy modes

There are 4 spy modes available for choice:

General spy: you have the permission to use the following 3 modes.

Normal spy: you can only hear the call, but can't talk

Whisper spy: you can hear the call, and can talk with the monitored extension

Barge spy: you can hear the call and talk with them both

Note: for example, if 500 want to monitor extension 501, we need to enable the

'allow being spied ' for 501, and choose the spy mode for extension 500.

Then pick up 500 and dial “feature codes + 501” to start monitoring when 501

is in a call

If 500 choose „normal spy‟, it should dial‟*90501‟ to start monitoring;