Specifications

MyPBX U5XX Administrator's Guide
www.yeastar.com Page 33
interruption during this time could cause damage to the system.
5.3.7 Alert Settings
If the device is attacked, the system will notify users the alert via call or E-mail.
The attack modes include IP attack and Web Login.
More details for the system security configuration, please refer to APPENDIX B
MyPBX Security Configuration Guide.
Figure 5-18
1.IPATTACK
When the system is attacked by IP address, the firewall will add the IP to auto
IP Blacklist and notify the user if it match the protection rule.
1）Phone Notification Settings
·PHONE Notification
Whether enable phone notification.
·Number
The numbers could be set for alert notification, users can setup multiple
extension and outbound phone numbers. Please separate them by „;‟.
e.g. „500;9911‟, if the extension has configured Follow Me Settings, the call
would go to the forwarded number directly.
·Attmtpts
The attempts to dial a phone number when there is no answer.
·Interval
The interval between each attempt to dial the phone number. Must be greater
than 3 seconds, the default value is 10 seconds.
·Prompt
Users will hear the prompt while receiving the phone notification.
2）E-mail Notification Settings