User manual

IP Intercom
fix four M3.5*12 screw on the wall with the screw driver.
3
、
After installing inter housing,Well-set the related wiring and replace the aluminum
housing.then power on and start testing.
3.Configuration of IP intercom
You need to know the IP address of IP network intercom before starting setting. you could learn
how to get IP address below. Default IP address is 192.168.1.153.in static status. If getting from
DHCP, you need to search the related IP address by the third software scanning equipment MAC.
(getting IP by DHCP is not suggested.)
3.1 Remote WEB Management
Once input the IP address of intercom on the web browser and tap the “enter” on the
keyboard. Then a login screen will pop up from the intercom equipment. You need to
input user name and password. Both default user name and password of system is case
letters “root”
www.escene.cn/en
ESCENE Communication CO. LTD.