User manual

IP Intercom
Two 3PIN ports, namely 2 sets of switching value outputs which can be connected to monitor
equipment or other security equipment.
One touch button, one key to quickly restore the factory value(refer to soft recovery, not hard
recovery).
One high-intensitive anti-sabotage industrial button.
Each motherboard port, check the picture illustration below "Mother Broad Interface".
Carton packaging
The whole Size
：
168*116*42mm
Product Certification
Platform Compatibility Test (non-certificate)
ZTE/Alcatel-Lucent/Asterisk/Broadsoft/Metaswitch/Yeastar/Avaya/3CX/Elastix/HUAWEI
etc.
Mother Broad Interface
2.Phone Installation
Generally system administrator will connect your new IS710-P(W)IP Phone to company
LAN network.If not,please refer to below illustration.
Open IS710-P(W)packing box,according to the packing list,check the related attachment
to make sure to no omitting.Packing list as follows.

IS710-P(W)Phone

Quick operating guide
www.escene.cn/en
ESCENE Communication CO. LTD.