User manual

IP Intercom
 The device has reserved the ganged port for the system of access control, alarm,
video surveillance etc.
 Support remote web management and maintenance e.g. account maintenance,
software upgrades, volume control and the signal control for switch value .
 Support POE power supply and external power adapter, POE function is unworkable
in WIFI series .
 WIFI Series is easy to be installed with strong expansion ,its RJ45 port having a
dual-use nature can be used as LAN port which is the same with the use of ordinary
series when people manually turn off WIFI.
1.3 Technical Information
Phone features
WEB Multi-language
；
Support 1 account line
，
one key function of the emergency call for
help, realize full-duplex and two-way voice intercom calls; Active / passive support
;Support calls holding, calls waiting and calls transfer; Call transfer (busy turn, blind turn,
consulting turn)
，
mute, don't disturb(DND)
，
Auto answer
，
three-way conference, the volume
control and so on
；
support IP direct dial without account;
Network parameters
Support SIP V1
（
RFC2543
）
,V2
（
RFC3261
）；
Support DNS SRV
（
RFC3263
）；
Support
STUN network penetration
；
Support 3 DTMF model: In-band,
、
RFC2833
、
SIP INFO
；
Support
Network model
：
Static IP/DHCP/PPPoE
；
built-in DNS/TFTP/FTP terminal
；
Support
NAT/DHCP service
；
Support SIP and RTP QoS
Security
Support VLAN
（
802.1pq
），
LLDP
，
VPN
（
L2TP/OPEN_VPN
）；
Support TLS
（
Transport
Layer Security
）
protocol
；
Support information authentication mechanism MD5
；
Support
AES encryption protocol
；
Support the Root/User level management mode.
Audio features
Wideband encoding: G.722
；
Narrow band encoding:G.711μ/A, G723.1, G726,
G.729AB
，
iLBC
；
Support VAD, CNG, AEC, AGC etc. audio processing
；
Full duplex
speaker, with automatic echo elimination (AEC).
Physical properties
Two RJ-45 10/100M Ethernet interfaces(LAN & Extension performance),under IS710-P,the
LAN port is for LAN;IS710-W LAN port for WIFI series ,when WIFI function opening ,it is PC
port
，
when WIFI function closing; Extension performance port;1&2 is for MIC Plus-n-
Minus,3&6is for Speaker Plus-n-Minus,4&5is for Power Plus-n-Minus,7&8 is for Button
Control Signal.
One power adapter port; IP network intercom output: 2Watts 8Ω; Power: DC 12V/1A;Two
3.5mm port, namely a recording port, a monitoring trigger alarm or other notification port.
Four 2PIN port, namely the power input, IP network intercom output and two sets of switching
value inputs which can be connected to monitor equipment or other security equipment.
www.escene.cn/en
ESCENE Communication CO. LTD.