IP Intercom IP Intercom User Manual IS760-P(W) ESCENE Communication Co. Ltd www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom Copyright and Disclaimer Copyright Copyright©2014 ESCENE Communication Co,. Ltd keeps all rights reserved. Any enterprises or individuals cannot extract ,copy and spread in any form of this document without our written permission .In accordance with the law, copying includes translating the document into other languages or conversing into other formats. When this document is transmitted in network media, ESCENE Communication Co,.Ltd allows downloading or printing for private use .
IP Intercom Summary Copyright and Disclaimer............................................................................................................ 2 1.Getting Started.......................................................................................................................... 4 1.1 Outline............................................................................................................................. 4 1.2 Product Features.......................................................
IP Intercom 4.2 Fire protection system application.............................................................................26 1.Getting Started 1.1 Outline Integrated IP network intercom panel IS710-P (W) wired, wireless-based devices is a hands-free intercom system which is adopting a new generation of IP & SIP technology and based on the innovation of carrier-grade IP telephony solution.
IP Intercom The device has reserved the ganged port for the system of access control, alarm, video surveillance etc. Support remote web management and maintenance e.g. account maintenance, software upgrades, volume control and the signal control for switch value . Support POE power supply and external power adapter, POE function is unworkable in WIFI series .
IP Intercom Two 3PIN ports, namely 2 sets of switching value outputs which can be connected to monitor equipment or other security equipment. One touch button, one key to quickly restore the factory value(refer to soft recovery, not hard recovery). One high-intensitive anti-sabotage industrial button. Each motherboard port, check the picture illustration below "Mother Broad Interface".
IP Intercom IS710-P(W) could be installed to internet according to the below steps. 2.1 Embedded If the product is used for embedding,then the cutting of embedded need to be a little bigger than the installing hole of standard dimension 168*116*42mm .(42mm means the extra aluminum housing thickness.),as follows. Notice: the embedded value is up to the actual situation. 2.2 Equipment installation 1、Open the aluminum housing. 2、built in the IP intercom according to the cutting embedded specification.
IP Intercom fix four M3.5*12 screw on the wall with the screw driver. 3 、 After installing inter housing,Well-set the related wiring and replace the aluminum housing.then power on and start testing. 3.Configuration of IP intercom You need to know the IP address of IP network intercom before starting setting. you could learn how to get IP address below. Default IP address is 192.168.1.153.in static status.
IP Intercom After the log-in，the administrate web page of the intercom will pop up. The setting and parameter of each option will be describe as follow. 3.2 Network This option is used for the network setting, please notice that if you have WIFI speaker, then you could set the LAN and VPN. www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.2.1 WIFI Setting Pls note that the option is just support item IS710-W. The below operation will guide you how to connect the WIFI intercom to WIFI network,if you know WIFI hot spot SSID,you could input in the text box are,you could also search “SITE SURVEY” according to the hot spot. 3.2.2 WIFI Status Pls note that the option is just support item IS710 -W.Once the device connect to the WIFI hot spot,you could use the below operation to check the WIFI connecting status. www.escene.
IP Intercom 3.2.3 LAN Setting This option is used for setting speaker IP, as shown below. www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.2.4 PC Setting PC Setting could just being used in IS710-W Model.When setting network bridge pattern at PC port,you could connect another internet equipment to PC port,amount to a port of a switch. www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.3 SIP Account ESCENE IP network intercom can be set up one SIP account, account’s user name, password and server address are mandatory. If all the information filled is valid and correct, then register will be launched from SIP server after submitting and saving. www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.4 Programmable keys This function is reserved for the future. 3.5 Voice You can manage the speaker volume ranks and microphones which showed in the following table. Please note that in most cases, if you open the microphone and switch to level 7, then don’t use speaker volume more than level 4, unless you can ensure that your coverage is small or noise reduction level is high. www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.6 Phone Book This function is reserved for the future. 3.7 Advanced Setting In advanced configuration, system parameters are the main points, other options, such as web dial-up, dialing rules, IP filtering strategy, ring tones, certificate management and global server, etc., most are reserved function which could be ignored. 3.7.
IP Intercom 3.7.2 VLAN Setting When IP network intercom‘s application environment involves the VLAN, the below operating will guide you how to use. 3.7.3 VPN Setting When IP network intercom‘s application environment involves the VPN, the below operating will guide you how to use. 3.8 Maintenance This part mainly introduces some maintenance method. According to the below, you can reconfigure Intercom IP Phone or view Intercom IP Phone log to gain more information about maintenance. www.escene.
IP Intercom 3.8.1 Log For most famous systems, log document will offer the record born by behavior change of Intercom IP Phone. Log document information contains the question you need to investigate. It can upload log document to the appointed Server as you need to gain information from it. 3.8.2 Password If you need to change the default password of Intercom IP Phone, so you need to configure password information.
IP Intercom use this function. IP address will recover to be default: 192.168.1.153. 3.8.4 Auto Provision Intercom IP Phone's automatic update feature is that it automatically read related configuration files from the server, thus to replace manual update operations. The following will illustrate related operations, such as the server name or address, verify the user name and password (optional), inspection cycle, reboot detection, etc. www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.8.5 TR069 Upgrade This function will cooperate with telecom IMS platform to use. Please follow below. www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.8.6 FTP Upgrade The following will direct you when you use FTP to upgrade. www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.8.8 TFTP Upgrade The following will direct you when you use TFTP to upgrade. 3.8.9 HTTP Upgrade The following will direct you when you use HTTP to upgrade. www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.8.10 Reboot The following will direct you if rebooting Intercom. Please note that do not reboot unless hooking or no reaction situations which is rare occurrence. 3.9 Phone Status The following will direct you information of system operation working time, account registration status and network setting www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.10 System Info The following will direct you equipment name, software/hardware version No, kernel version No. and related server address. www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 3.11 Language The following will direct you how you to change language with the intercom. 4. Brief pictures for application environment The following pictures introduce the practical application of IP intercom, take door security and fire protection for example. More compatibility application is subject to actual test. 4.1 Door security system application www.escene.cn/en ESCENE Communication CO. LTD.
IP Intercom 4.2 Fire protection system application www.escene.cn/en ESCENE Communication CO. LTD.
