User Guide

User Guide for the W52P IP DECT Phone
48
 On (Beep On): Auto intercom feature is on. The handset will answer an incoming
internal intercom call automatically and play a warning tone.
 On (Beep Off): Auto intercom feature is on. The handset will answer an incoming
internal intercom call automatically without a warning tone.
 Off: Auto intercom feature is off. You need to answer an incoming internal intercom
call by pressing the Accept soft key.
To configure auto intercom via the handset:
1. Press to enter the main menu.
2. Select ->Telephony->Auto Intercom.
The LCD screen displays three configuration types.
3. Press or to highlight the desired configuration type.
4. Press the Change soft key.
The radio box of the selected configuration type is marked.
In some instances, you may need to restart the base station to refresh the settings.
To restart the base station via the handset:
1. Press to enter the main menu.
2. Select ->System Settings->Base Restart.
3. Enter the system PIN (default: 0000).
4. Press the Done soft key.
After the above steps, the registration LED and network status LED go out simultaneously.
After a period of time, the LED indicators will illuminate solid green again when the base
station restarts successfully.
You can reset individual settings that you have made on the handset. Resetting handset
will not overwrite settings of directory, call history, voice mail and the handset
registration to the base station. Other customized settings on the handset will be reset to
factory settings after handset reset. We recommend that you ask your system
administrator for advice before resetting your handset.
To reset the handset via the handset:
1. Press to enter the main menu.
2. Select ->System Settings->Handset Reset.
The LCD screen prompts “Reset handset to default?”.