User Guide

User Guide for the W52P IP DECT Phone
32
The phone will use the daylight saving time of the selected location.
Note
To configure the DST manually via web user interface:
1. Click on Phone->Preference.
2. Mark the Enabled radio box in the Daylight Saving Time field.
3. Do one of the following:
- Mark the radio box of By Date in the Fixed Type field.
Enter the start date and end date in the corresponding fields.
- Mark the radio box of By Week in the Fixed Type field.
Select the desired date from the pull-down lists of Start Date and End Date.
4. Enter the offset time (in minutes) in the Offset field.
5. Click Confirm to save the change.
If the location you select does not use daylight saving time, the fields of Start Date, End
Date and Offset will be left blank.