User Guide

User Guide for the W52P IP DECT Phone
20
To turn the handset on via the handset:
Do one of the following:
- Long press until the LCD screen lights up.
- Place the handset in the charger cradle.
The handset will be turned on automatically.
To turn the handset off via the handset:
1. Long press again when the handset is idle.
You can adjust the ringer volume of your handset according to the noise level of the
surrounding environment. The ringer volume can be adjusted using the menu or the
predefined shortcuts (left and right navigation keys) on the keypad when the handset is
idle. The handset supports 5 different ringer volume levels. The default level is 3.
For more information on adjusting the ringer volume using the menu, refer to Ring Tones
on page 26.
To adjust ringer volume using the predefined shortcuts via the handset:
1. Press or when the handset is idle.
Press to decrease the ringer volume, or press to increase the ringer volume.
2. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
You can lock the handset keypad to prevent keys from being accidentally pressed.
To lock the keypad via the handset:
1. Long press when the handset is idle until the LCD screen prompts Keypad
Locked, Press and hold # to unlock!.
The keypad is locked and the icon appears on the status line.
You can still answer or reject incoming calls as usual. You can also end the
answered call by pressing .
If the ringer volume is adjusted to the minimum, the icon will appear on the status
line.