Manualshelf

User Guide

ManualsBrandsYealink ManualsOtherYealink SIP-T54S 2-UNITS IP Phone PoE 16-Lines Dual-port Gigabit Ethernet
221222223224225226227228229230
User Guide for the SIP-T54S Media IP Phone
214
- Press the line key when the phone is idle to enter the dialing screen.
Enter the desired number using the keypad and then press , , or the Send soft
key.
The phone will dial the entered number.
To place multiple calls on the bridged line:
You can have more than one call on the bridged line. To place a new call where there is an active
call on phone A, do one of the following on the phone A:
- Press or the Hold soft key. The original call is placed on hold.
Press the New Call soft key to enter the dialing screen.
Enter the desired number using the keypad.
Press , , or the Send soft key.
Phone A will dial the entered number.
- Press the line key. The original call is placed on hold.
Enter the desired number using the keypad.
Press , , or the Send soft key.
Phone A will dial the entered number.
Answering Calls
When the phone C dials the BLA number “14084588327”, an incoming call will arrive on the
bridged lines. The phone A and phone B ring simultaneously and the LED indicators of the line
key on both phone A and phone B will flash green. You can answer the incoming call on either
phone A or phone B but not both.
Do one of the following on phone A or phone B:
- Press , or the Answer soft key on phone A.
Phone B stops ringing. The LED indicator of the line key on the phone A will illuminate solid
green. At the meanwhile, the LED indicator of the line key on the phone B will illuminate
solid red indicating that there is an active call on the phone A.
- Press , or the Answer soft key on phone B.
Phone A stops ringing. The LED indicator of the line key on the phone B will illuminate solid
green. At the meanwhile, the LED indicator of the line key on the phone A will illuminate
solid red indicating that there is an active call on the phone B.
Placing a Call on Hold
To place a call on hold:
1. Press or the Hold soft key on phone A when party A and party C are talking.
The line key LEDs on phone A slowly flash green and phone B slowly flash red when the
bridged line call is placed on hold.