Specifications

User Guide for the SIP-T48G IP Phone
80
Value (the number you want to transfer to)
Usage:
 When the transfer mode on DSS key is Blind Transfer, tap the transfer key to
complete the blind transfer to the number specified in the Value field.
 When the transfer mode on DSS key is Attended Transfer, tap the transfer key to
dial out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
 When the transfer mode on DSS key is New Call, tap the transfer key to place a
new call to the number specified in the Value field.
Note
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies: Type (Key Event)
Key Type (Hold)
Label (key label displayed on the touch screen)
Usage:
1. Tap the hold key during an active call to place the call on hold.
2. Tap the hold key again to retrieve the held call.
DND
You can use this key feature to activate or deactivate DND. You can also use this key
feature to access the custom DND screen. For more information, refer to Do Not Disturb
(DND) on page 110.
Dependencies: Type (Key Event)
Key Type (DND)
Label (key label displayed on the touch screen)
Usage:
When DND is in phone mode:
1. Tap the DND key to activate DND.
2. Tap the DND key again to deactivate DND.
When DND is in custom mode:
1. Tap the DND key to access the custom DND screen. You can activate or deactivate
DND for one or all accounts.
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer. For more information on how to configure the transfer mode via DSS
key, refer to Busy Lamp Field (BLF) on page 137.
If the Value field is left blank, the transfer key performs the same as the TRANSFER key or
the Transfer soft key during a call. For more information, refer to Call Transfer on page
123.