Specifications

Customizing Your Phone
65
If you want to use a wired headset, physically connect your headset and activate the
headset mode for use. For more information on physically connecting a headset, refer
to Phone Installation on page 12.
If you want to use a wireless headset, insert the Bluetooth USB dongle BT40 into the USB
port on the back of the phone. For more information on using a Bluetooth headset, refer
to Bluetooth Headset on page 67.
This section provides an introduction to wired headset use.
Note
To activate the headset mode:
1. Press on the phone.
The HEADSET key LED illuminates solid green, and the icon appears on the
status bar of the touch screen when the headset mode is activated. When you tap
the line key or the Answer soft key to answer an incoming call, the call is connected
to your headset automatically. For more information on using the headset to answer
a call, refer to Answering Calls on page 100.
With the handset on-hook, enter the desired number and tap the Send soft key, the
phone will then place a call using the headset automatically. For more information
on using the headset to place a call, refer to Placing Calls on page 98.
To deactivate the headset mode:
1. Press again on the phone.
The HEADSET key LED goes out, and the icon disappears from the touch screen
when the headset mode is deactivated.
You can use headset in priority when headset prior feature is enabled. This feature is
especially useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
If both a Bluetooth headset and a wired headset are connected, only the Bluetooth
headset can be used.