Specifications

User Guide for the SIP-T48G IP Phone
22
4. Tap the Save soft key to accept the change or to cancel.
To configure a static IPv4 address via phone user interface:
1. Tap ->Advanced (default password: admin) ->Network->WAN Port->IPv4.
2. Tap the gray box of the Type field.
3. Tap Static IP from the pull-down list.
4. Enter the desired values in the IP Address, Subnet Mask, Gateway, Primary DNS
and Secondary DNS fields respectively.
5. Tap the Save soft key to accept the change or to cancel.
To configure a static IPv6 address via phone user interface:
1. Tap ->Advanced (default password: admin) ->Network->WAN Port->IPv6.
2. Tap the gray box of the Type field.
3. Tap Static IP from the pull-down list.
4. Enter the desired values in the IP Address, IPv6 IP Prefix, Gateway, Primary DNS and
Secondary DNS fields respectively.
5. Tap the Save soft key to accept the change or to cancel.