Specifications

User Guide for the SIP-T48G IP Phone
158
ACD system, tap the Logout soft key.
Note
You can leave voice mails for someone else using the SIP-T48G IP phone. You can also
listen to the voice mails that are stored in a voice mailbox. When receiving a new voice
mail, the phone will play a warning tone, and the power indicator LED will slow flash red.
The touch screen will prompt that the phone receives a new voice mail with the number
of waiting voice mails (e.g., New Voice Mail(1)) and the icon.
If the voice mail pop-up message box disappears, it won't pop up again unless the user
receives a new voice mail or the user re-registers the account that has unread voice
mail(s).
Note
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave a voice mail,
and then hang up.
To configure voice mail access codes via phone user interface:
Voice Mail is not available on all servers. You can configure the phone not to display the
pop-up prompt, contact your system administrator for more information.
The icon on the status bar has a counter indicating the number of messages you
haven’t heard yet.
It is recommended you configure no more than one ACD key per phone. At any time, at
most one ACD key can be in progress on your phone.