Specifications

User Guide for the SIP-T48G IP Phone
148
automatically answer an incoming intercom call while there is already an active call on
the phone. The active call is then placed on hold.
Intercom features you need to know:
Intercom Feature
Description
Accept Intercom
Enable or disable the IP phone to automatically
answer an incoming intercom call.
Intercom Mute
Enable or disable the IP phone’s microphone for
intercom calls.
Intercom Tone
Enable or disable the IP phone to play a warning
tone when it receives an incoming intercom call.
Intercom Barge
Enable or disable the IP phone to automatically
answer an incoming intercom call while there is
already an active call on the phone.
To configure intercom features via phone user interface:
1. Tap ->Features->Intercom.
2. Make the desired changes.
3. Tap the Save soft key to accept the change or to cancel.
These specific parameters are configurable via web user interface at the path
Features->Intercom.
Accept Intercom
You can enable or disable the phone to automatically answer an incoming intercom call.
If Accept Intercom is enabled, the phone will automatically answer an incoming
intercom call. If Accept Intercom is disabled, the phone will reject incoming intercom
calls and send a busy message to the caller. Accept Intercom is enabled by default.
Note
Your administrator can set a period of delay time before the phone automatically
answers intercom calls. Contact your system administrator for more information.