Specifications

User Guide for the SIP-T48G IP Phone
144
The Record and URL Record keys control the recording function, and are available:
 During an active call
 When calls are on hold or muted
 During a blind or attended transfer
 During a conference call
The Record and URL Record keys are not available when:
 There are no connected calls on your phone
 You place a new call
To record a call:
1. Tap the Record key or URL Record key during a call.
If the recording starts successfully, the recording icon will appear on the touch
screen and the icon of the Record key or URL Record key changes to .
2. Tap the Record key or URL Record key again to stop recording.
The recording icon disappears from the touch screen and the icon of the Record key
or URL Record key changes to .
Recording status indications you need to know:
Circumstance
Icons on the touch screen
A recording is started
appears on the touch screen
A recording cannot be started
appears for 1 second
A recording cannot be
stopped
appears for 1 second, then goes back
The recording box is full
appears for 1 second
The call cannot be recorded
appears for 1 second
You can listen to the recordings stored on your server system. For example, you can dial
an access code to listen to the recordings.
Note
Hot desking originates from the definition of being the temporary physical occupant of
a work station or surface by a particular employee. A primary motivation for hot
desking is cost reduction. This feature is regularly used in places where not all the
employees are in the office at the same time, or not in the office for very long, which
means that actual personal offices would be often vacant, consuming valuable space
The way in which you listen to the recordings may be different depending on the server.
Contact your system administrator for more information.